Skip to content

How to Replace Belt on Bissell Pet Hair Eraser

  • by
An image showing a close-up view of a Bissell Pet Hair Eraser vacuum cleaner

So, you’ve found yourself tangled up in a hairy situation with your Bissell Pet Hair Eraser. Don’t fret! In just a few simple steps, you’ll be able to replace the belt and have your vacuum running smoothly again.

With the right tools and a little know-how, you’ll be back to cleaning up pet hair in no time. So, let’s get started and get that belt replaced!

Key Takeaways

  • The tools needed for belt replacement on a Bissell Pet Hair Eraser include a screwdriver, replacement belt, belt tension adjustment knob, motor shaft, and brush roll.
  • The belt tension adjustment knob is used to loosen and tighten the belt, allowing for easy replacement.
  • To access the belt, the vacuum cleaner cover needs to be removed by unscrewing the screws.
  • When installing the new belt, it is important to ensure it is aligned correctly, centered, and with the right tension to ensure smooth operation of the brush roll.

Tools Needed for Belt Replacement

You’ll need a screwdriver and a replacement belt to complete the belt replacement on your Bissell Pet Hair Eraser. Before getting started, make sure you have these tools on hand.

The first step is to locate the belt tension adjustment knob on the side of the vacuum. Use the screwdriver to loosen the knob and release the tension on the belt. This will make it easier to remove the old belt and install the new one.

Next, align the new belt properly by placing it around the motor shaft and the brush roll. Make sure it sits snugly in the grooves and is centered. Once the belt is aligned, tighten the belt tension adjustment knob to secure it in place.

With the belt tension adjusted and properly aligned, you’re now ready to move on to the next step of removing the cover to access the belt.

Removing the Cover to Access the Belt

To access the belt, simply remove the cover on your Bissell Pet Hair Eraser.

Before we get into troubleshooting tips for belt replacement, let’s discuss common belt issues in vacuum cleaners. Over time, belts can become worn or stretched, causing them to slip or break. If you notice a burning smell or the vacuum cleaner brush not spinning properly, it might be time to replace the belt.

Now, let’s move on to troubleshooting tips for Bissell Pet Hair Eraser belt replacement. Start by unplugging the vacuum cleaner and turning it upside down. Locate the screws that secure the cover and use a screwdriver to remove them. Carefully lift off the cover to reveal the belt.

Removing the Old Belt

Once the cover is removed, carefully inspect the old, worn-out belt for any signs of damage. Belt replacement troubleshooting is necessary when your vacuum cleaner is not picking up dirt effectively or making strange noises. Common signs of a worn out belt in vacuum cleaners include a loose or slipping belt, a burning smell, or visible wear and tear. If you notice any of these signs, it’s time to replace the belt. To help you visualize the process, refer to the table below for a step-by-step guide on removing the old belt:

Step Actions
1 Locate the belt on the brushroll
2 Release the tension on the belt
3 Slide the belt off the brushroll

Installing the New Belt

Now that the old belt has been removed, it’s time to install the new one onto the brushroll of your vacuum cleaner. Follow these steps to ensure a proper installation:

  1. Align the belt: Place the new belt around the brushroll, making sure it’s centered and positioned correctly. This will prevent any misalignment issues during operation.

  2. Check tension: Ensure the belt has the right amount of tension. It should be snug but not too tight or loose. This will optimize the performance of your vacuum cleaner.

  3. Test for proper operation: After installing the new belt, turn on your vacuum cleaner and check if the brushroll spins smoothly. If there are any issues, such as a noisy or jerky movement, troubleshoot and adjust the belt accordingly.

Reassembling the Bissell Pet Hair Eraser

After aligning the brushroll and checking the tension of the new belt, you can now proceed to reassemble the Bissell vacuum cleaner. Here are some reassembling tips to ensure a smooth process.

  1. Start by carefully placing the brushroll back into its housing, making sure it’s properly aligned.

  2. Next, reattach the end caps to secure the brushroll in place. Double-check that they’re firmly in position.

  3. Now, locate the bottom plate and position it over the brushroll housing. Make sure it fits snugly and aligns with the screw holes.

  4. Insert and tighten the screws using a screwdriver, but be careful not to overtighten.

  5. Finally, attach the belt access door back onto the vacuum, ensuring it closes securely.

If you encounter any issues during reassembly, such as difficulty fitting the parts or the brushroll not spinning properly, double-check the alignment and tension of the belt. Troubleshooting these common issues will help you ensure a successful reassembly.

Frequently Asked Questions

How Often Should I Replace the Belt on My Bissell Pet Hair Eraser?

To properly maintain the belt on your Bissell Pet Hair Eraser, it’s important to know when it’s time for a replacement. Regularly check for signs of wear and tear, such as fraying or loss of tension, and replace as needed.

Can I Use Any Type of Belt for My Bissell Pet Hair Eraser, or Do I Need to Use a Specific One?

To ensure optimal performance, it is important to use the correct belt for your Bissell Pet Hair Eraser. While there may be different types of belts compatible, using the specific one recommended is highly recommended.

Is It Difficult to Remove the Cover to Access the Belt?

Removing the cover on your Bissell Pet Hair Eraser to access the belt is not difficult. Simply follow these steps: 1) Unplug the vacuum. 2) Locate and remove the screws securing the cover.

How Long Does It Take to Install the New Belt on the Bissell Pet Hair Eraser?

To install the new belt on your Bissell Pet Hair Eraser, it should take about 10-15 minutes. Make sure to follow the troubleshooting tips, such as checking for any obstructions, to ensure a smooth installation process.

Are There Any Special Tips or Tricks for Reassembling the Bissell Pet Hair Eraser After Replacing the Belt?

When reassembling the Bissell Pet Hair Eraser after replacing the belt, there are a few helpful tips. Make sure to align the parts correctly and troubleshoot any issues that may arise.


Now that you know how to replace the belt on your Bissell Pet Hair Eraser, you can easily keep it running smoothly and efficiently.

Just follow these step-by-step instructions, and your vacuum will be back in action in no time.

Like a well-oiled machine, your Pet Hair Eraser will tackle any pet hair mess, leaving your floors clean and spotless.