Skip to content

How to Replace Lower Hose on Bissell Pet Hair Eraser

  • by
An image illustrating step-by-step instructions to replace the lower hose on a Bissell Pet Hair Eraser

I’ll show you how to replace the lower hose on your Bissell Pet Hair Eraser in just a few simple steps.

With the right tools and a little patience, you’ll have your vacuum up and running smoothly again in no time.

Follow along as I guide you through the process, from removing the old hose to installing the new one and testing the replacement.

Let’s get started!

Key Takeaways

  • Check for visible cracks or leaks in the lower hose of the Bissell Pet Hair Eraser.
  • Remove any debris or blockages using pliers to ensure optimal suction power.
  • When removing the old hose, loosen the hose clamp near the base and slide it away.
  • Install the new lower hose by aligning it with the attachment point and pushing it firmly until it clicks into place.

Tools and Materials Needed

I’ll need a pair of pliers and a new lower hose to replace on my Bissell Pet Hair Eraser.

When it comes to common issues with the lower hose, there are a few troubleshooting tips to keep in mind. First, check for any visible cracks or leaks in the hose. If you notice any damage, it’s time to replace it.

Another common issue is clogging, which can restrict the suction power of your vacuum. To fix this, try removing the hose and using the pliers to carefully remove any debris or blockages.

If the hose is still not functioning properly, it may be time to replace it altogether.

Now that we’ve covered the common issues and troubleshooting tips, let’s move on to removing the old lower hose.

Removing the Old Lower Hose

To start, I’ll detach the old hose from the vacuum cleaner.

  • Locate the hose clamp near the base of the hose.
  • Using a screwdriver, loosen the clamp by turning it counterclockwise.
  • Once the clamp is loose, slide it away from the hose.
  • After removing the clamp, grip the hose firmly and twist it back and forth to loosen it from the vacuum cleaner.
  • Pull the hose straight out of the vacuum cleaner, being careful not to damage any surrounding components.

Now that the old hose is detached, it’s important to clean it before installing the new one.

  • Inspect the hose for any debris or clogs.
  • Use a long, flexible brush to gently scrub the inside of the hose to remove any dirt or dust.
  • Rinse the hose with warm water to ensure it’s thoroughly cleaned.

Following these steps will ensure a successful removal of the old lower hose and prepare it for installation of the new one.

Installing the New Lower Hose

After cleaning the old hose, it’s time to attach the new one to the vacuum cleaner. Here is a step-by-step guide for beginners on installing the new lower hose on the Bissell Pet Hair Eraser:

  1. Ensure that the vacuum cleaner is turned off and unplugged before starting the installation process.

  2. Locate the lower hose attachment point on the vacuum cleaner. It’s usually found at the base of the unit.

  3. Align the new lower hose with the attachment point and push it firmly until it clicks into place. Ensure that it’s securely attached.

  4. Once the hose is attached, check for any leaks or loose connections. If you notice any issues, double-check that the hose is properly installed and securely fastened.

  5. After confirming the proper installation, plug in the vacuum cleaner and turn it on to test the new lower hose.

Testing the Replacement

Once the new attachment is securely in place, I can test the replacement by turning on the vacuum cleaner and checking for proper suction.

Here is the step-by-step testing process for the replaced lower hose:

  • Ensure that all connections are secure and properly fitted.

  • Turn on the vacuum cleaner and listen for any unusual noises or vibrations.

  • Place your hand over the nozzle attachment and check for a strong suction. If the suction is weak or non-existent, troubleshoot using the following tips:

  • Check for any clogs or blockages in the hose or attachments.

  • Inspect the seals and gaskets for any signs of damage or wear.

  • Make sure the hose is properly connected to the vacuum cleaner and the nozzle attachment.

If the troubleshooting tips don’t resolve the issue, double-check the installation of the new lower hose for any errors or misalignments.

Maintenance Tips for the Lower Hose

I regularly inspect the lower hose for any signs of wear or damage, as part of my maintenance routine. This is an important step to ensure the optimal performance of my Bissell Pet Hair Eraser. Cleaning techniques and troubleshooting tips are essential to keep the lower hose in good condition. Here are some key techniques and tips to follow:

  1. Cleaning Techniques:

    • Use a damp cloth to wipe away any dirt or debris on the hose.
    • Gently scrub the hose with a mild detergent and warm water.
    • Rinse thoroughly and allow it to air dry before reattaching.
  2. Troubleshooting Tips:

    • If the hose is clogged, use a long, flexible brush or a pipe cleaner to remove any blockages.
    • Check for any leaks or cracks in the hose. If found, replace it immediately to avoid further damage.

Frequently Asked Questions

Can I Use a Different Brand of Lower Hose for My Bissell Pet Hair Eraser?

Yes, you can use a different brand of lower hose for your Bissell Pet Hair Eraser. However, there may be compatibility issues and differences in quality. It is recommended to compare the options and choose the best alternative for optimal performance.

Is It Necessary to Use Any Specific Cleaning Solution When Testing the Replacement Lower Hose?

When testing a replacement lower hose, it is not necessary to use any specific cleaning solution. However, it is important to properly clean the lower hose before installation to ensure optimal performance.

How Often Should I Replace the Lower Hose on My Bissell Pet Hair Eraser?

I make sure to clean the lower hose on my Bissell Pet Hair Eraser regularly to keep it functioning at its best. However, if it becomes damaged or clogged, it’s important to replace it promptly for optimal performance.

Can I Use the Same Lower Hose on Both the Upper and Lower Sections of the Vacuum Cleaner?

No, it is not recommended to use the same lower hose on both the upper and lower sections of the vacuum cleaner. It is important to use the correct hose for each section to ensure proper functioning.

Is There a Warranty on the Replacement Lower Hose for the Bissell Pet Hair Eraser?

Yes, there is a warranty on the replacement lower hose for the Bissell Pet Hair Eraser. It provides coverage for any defects or malfunctions. Additionally, the hose is compatible with older models of the vacuum cleaner.


In conclusion, replacing the lower hose on the Bissell Pet Hair Eraser is a straightforward process that can be done with just a few tools and materials. By following the step-by-step instructions, you can ensure that your vacuum is functioning properly and effectively removing pet hair from your home.

Remember to regularly maintain the lower hose to prolong its lifespan and prevent any potential issues. With this simple fix, you can keep your Bissell Pet Hair Eraser running smoothly for years to come.

So don’t delay, get your replacement hose today!